Notes
Bend Force
Force required to bend shaft 90 degrees
Insulation
1. High Impact Polystyrene
2. High Heat Vinyl Sleeving, 150°C
Contact Material
Brass Alloy
Receptacle Material
Brass, Nickel Plated
Set Screw
Can be used in Position "A" or "B"
Tolerances
Decimal ±.005" (.127mm)
Fractional ±1/32" (.787mm)
unless otherwise noted

Pin Type Flexible Test Connectors

Type inch ±.015 mm ±.396 inch ±.0625 mm ±1.58 inch ±.001 mm ±.025 Contact Plating Current Rating Bend Force
620-22P .080 2.03 2.125 54.0 .031 .787 Gold 3A 3-6oz.
620-20P .106 2.70 2.15625 54.8 .040 1.02 Gold 5A 10-12oz.
590-16P .159 4.04 2.5625 65.0 .062 1.57 Silver 10A 20-24oz.
590-12P .209 5.31 2.59375 65.8 .094 2.39 Silver 15A 26-30oz.
590-8P .260 6.60 2.8125 71.4 .142 3.61 Silver 20A 36-40oz.

Working volts 600V for all types