Notes
Bend Force
Force required to bend shaft 90 degrees
Insulation
1. High Impact Polystyrene
2. High Heat Vinyl Sleeving, 150°C
Contact Material
Brass Alloy
Receptacle Material
Brass, Nickel Plated
Set Screw
Can be used in Position "A" or "B"
Tolerances
Decimal ±.005" (.127mm)
Fractional ±1/32" (.787mm)
unless otherwise noted

Socket Type Flexible Test Connectors

Type inch ±.015 mm ±.396 inch ±.0625 mm ±1.58 inch ±.001 mm ±.025 Contact Plating Current Rating Bend Force
620-22S .080 2.03 2.125 54.0 .034 .86 Gold 3A 3-6oz.
620-20S .106 2.70 2.15625 54.8 .043 1.09 Gold 5A 10-12oz.
590-16S .159 4.04 2.59375 65.9 .067 1.70 Silver 10A 20-24oz.
590-12S .209 5.31 2.625 66.7 .099 2.51 Silver 15A 26-30oz.
590-8S .260 6.60 2.84375 72.2 .147 3.73 Silver 20A 36-40oz.

Working volts 600V for all types

 


©2008 Pelco Component Technologies | Designed and Made in the USA